01-30-2012 08:49 AM - edited 07-03-2021 09:28 PM
Hello, i have a WLC, software version 7.0.116. I want to limit bandwidth to one vlan. For what i know i can edit a QOS profile and apply it to a vlan.
The thing is that if i try to edit any of the 4 qos profile vlans, platinum, gold, silver and bronze, i don`t have the option that i had in the 4.2.176.0 version, meaning that Per-User Bandwidth Contracts (k) * is missing, i only have Wired QoS Protocol.
Can anyone pls tell me how can i limit bandwidth to this version?
Also the sintax from CLI is missing.
01-30-2012 08:53 AM
are you configuring this from the WLC or from the WCS? If from WCS, what version are you running? for WCS, it needs to be => the WLC version
The Per User QoS is still there:
Steve
01-30-2012 10:36 AM
Hello Stephen,
I didn`t mention anything about WCS. Everything is controller by WLC. I've attached a print screen with the missing tabs in my previous post.
01-30-2012 10:37 AM
are you logging in via TACACS? is it possible that you have restricted access, or that the task list wasn't updated with the upgrade to 7.0? The Per-User should be there under the Profile tab.
Steve
01-30-2012 11:23 AM
Hello again,
Thanks for you're replys. I do not log in via TACACS. Just a simple admin user with read/write permisions.
I did not upgrade the version on my WLC. I had a couple controllers that i manage.
I have just noticed that on one controller (the 4.2.176.0 version ) i have this options, and on new one they are missing.
On the QOS i only have the profiles option. I don`t have roles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide