Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

Cat. 3850 New-Style (or fall back to legacy mode)

Hi there,

I have a problem with the configuration of 3850 for 802.1X.

The switch was changed from someone on the "New-Style" and I can not therefore use the commands known to me.

Switch_1 # authentication display config-mode
Current configuration mode is new-style

I want to move, for example, a user who can not auth. against the RADIUS in a Guest VLAN.
Old commands:
- Authentication event no-response action authorize vlan xxx
- Dot1x guest-vlan xxx

Output for the command: "authentication event no-response action authorize vlan xx" is:
Switch_1 (config-if) # authentication event no-response action authorize vlan 103
Command deprecated (authentication event no-response action authorize vlan 103) - use cpl config

I think, unfortunately, no reasonable explain how I configure the "new style"?

Better yet, how can I switch back to legacy mode?

Thank you for your quick support

Greeting Alexander

New Member

ive got the same problem

ive got the same problem

there is no manual to convert it back after you done a reload in new-style configuration

New Member

We accidently convert one


New Member

aaa authorization commands 15

We accidently convert one Switch to the "new-style"

To keep all the Switch configs the same, we need to force the Switch to go back to "legayc" but the authentication display command is alread no longer avialable.

How can this be foreced?

New Member

Re: aaa authorization commands 15

Did you ever find an answer to this?

CreatePlease to create content