at a customer side I had installed a NCS at a virtual machine. Last week we had to change the IP address to another Network. At this point my autonomous migrations to CAPWAP failed, because the APs want to upload the env_var to the default tftp server. The default tftp server at NCS have the old IP before the ip address change.
I assume this has been resolved or you've found a work around by now. But did you try to SSH into the NCS? When I show run in my NCS I see the following for the defaultRepo. As far as I know this wasn't changed.
As you can see, there's not much to it. If you wish to alter a repository do the following.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...