Hi All, following Scenario: Customer wants to Broadcast one SSID, within authentication against Radius (Free Radius) the User should be moved into another, not broadcasted SSID with a separate Security Policy. Is such a scenario realisable? I know that it is supported in IOS based Implementation, called SSID-IE. Regards, Michael
Re: Changing SSID with Radius Attributes w Controller
When you create an SSID in global configuration mode, you can assign or change the SSID attributes only in global configuration mode. Similarly, when you create an SSID in configuration interface mode, you can assign or change the SSID attributes only in configuration interface mode. Refer to the following URL for creating SSID
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...