I use the following config
!
dot11 ssid VU-Campusnet
vlan 104
authentication open eap Dot1x-Authentication
authentication key-management wpa optional
accounting Dot1x-Accounting
guest-mode
!
dot11 aaa csid ietf
dot11 network-map
power inline negotiation prestandard source
!
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption vlan 104 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 104 mode ciphers aes-ccm tkip wep128
!
encryption vlan 208 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 208 mode ciphers aes-ccm tkip wep128
!
encryption vlan 802 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 802 mode ciphers aes-ccm tkip wep128
!
encryption vlan 997 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 997 mode ciphers aes-ccm tkip wep128
!
ssid VU-Campusnet
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
channel 2462
station-role root
rts threshold 2312
no dot11 extension aironet
no cdp enable
!
On the tested Wlan interface from Intel it works. But when we use the Sitecom WL170 or WL112 it won't. can some one help me...
