Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 3502i to allow Windows 8 only

Hello

I am setting up a test AP for Windows 8. Is there a way that i can restrict access to this AP by Windows version or by MAC

address of the select wireless devices being used for the test.

I have controller(s), AIR-CT5508-K9, that the AP associates to.

I also have an WCS to manage controllers

Finally an VM wireless ACS to authenticate against.

sMc
2 REPLIES
Bronze

Re: Cisco 3502i to allow Windows 8 only

You can create WLAN with MAC auth.

This describes the steps direcly on the WLC
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml

From WCS create templates for similar action an apply to controllers

Sent from Cisco Technical Support iPad App

Hall of Fame Super Gold

Cisco 3502i to allow Windows 8 only

You create a separate WLAN.  You use AP Groups and assign this very-specific AP into that AP group and specify the WLAN you want this AP will broadcast. 

147
Views
0
Helpful
2
Replies
CreatePlease to create content