Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco ACS (TACACS+) - AAA failure on WLC

Setting up TACACS+ between Cisco ACS and 4402 WLC using the below configuration guide.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080851f7c.shtml#add-authorizserv

Authenication is failing on the WLC. Currently getting the below error message on the Cisco ACS server (Reports and activity > failed attempts)

Message Type: Author Failed


Author-Failure-Code: Service denied


Author-Data: service=ciscowlc protocol=common

Anybody have any idea to resolve this problem.

Thanks,

Colm

3 REPLIES

Re: Cisco ACS (TACACS+) - AAA failure on WLC

Cisco Employee

Re: Cisco ACS (TACACS+) - AAA failure on WLC

Hi,


The document you referred is correct.


What version of WLC are you running?


Check this one:


CSCsk21007    WLC requires tacacs authentication when configuration change ccess Control


HTH


Regards,

JK


Plz rate helpful posts-

~BR Jatin Katyal **Do rate helpful posts**
New Member

Re: Cisco ACS (TACACS+) - AAA failure on WLC

WLC is running v6.0.188.0

Could I be missing a TACACS+ value on the Cisco ACS.

2197
Views
0
Helpful
3
Replies
CreatePlease to create content