Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Aironet CB21AG, LEAP Software & ACS - No DHCP

We got our first CB21AG cards last week, and I've been playing with it to get it to work with the APs and ACS server that we have setup. I've installed the software and configured it exactly as the LEAP software for the older A cards is setup but the APs don't seem to want to assign a DHCP address to the computer. However, if I assign a static/alternative IP to the computer, and reauthentic, the wireless connection works great. Also, the Authentication window doesn't come up immediately after I hit Ctrl-Alt-Delete to login into the machine, as it did with the older software.

Steps I've tried: Removing and reinstalling the Cisco LEAP software, Reauthenticing the machine to the AD Domain, and Starting with a Static IP and then converting to DHCP.

Laptop: Panasonic ToughBook CF-29, WinXP, CB21AG Card.

APs: Aironet 1200s, A & G Radio equipped

Any help or ideas would be appreciated.

New Member

Re: Cisco Aironet CB21AG, LEAP Software & ACS - No DHCP

This is a known bug with older VxWorks APs. Check out bug ID # CSCed23644.


Re: Cisco Aironet CB21AG, LEAP Software & ACS - No DHCP

Thanks for the nudge in the right direction. My guess is that this will solve it, but I'll know sometime next week, once we get a chance to flash the APs.