cisco MSE cannot access thru https://

[declan liddy]

Hi I have installed cisco Mobility Service engine, but I cannot access it thru the gui https://[ip address]

if i type https://[ip address] I get the certificate errors but the i get an error

Forbidden

You don't have permission to access / on this server.

Has any one seen this

[Rob Johnson]

What version is the MSE? 

Prior to 7.4 one couldn't do anything from a browser.   The MSE is setup from the CLI and managed via WCS/NCS and/or Prime Infrastructure.  There was no need to even access the MSE from a browser...

7.4 and above you can manage through the browser the mobile concierge service:::

http://www.cisco.com/en/US/prod/collateral/wireless/ps9733/ps9742/guide_c07-726506.html

http://:8080/ui

[aseppanen]

We have MSE 7.6.120.0.

If I enter:

https://[ip_addr]

I get this:

Forbidden

You don't have permission to access / on this server.

If I enter http://[ip_addr]:8080/ui/

I get nothing. How can I access the GUI using browser?

[jucape2009]

try to access with https://ip_addres/ui/

you need to type / at the end, otherwise the forbidden message will appear.

regards!

[halilibrahim1877]

ok , I resolved this problem , thanks