I have recently upgraded to version 2.0 with the latest software patch and most things seem to be ok. A few things I've noticed was that my maps do not zoom in like they did in version 1.2 which really sucks. I also recently created a template to move my lightweight AP's to another controller and it shows success but no AP takes the change. Has anyone else had these issues and if so has anyone had them resolved?
I had the same mapping issues you're talking about. I fixed it by going into the main maps summary screen and choosing export from the drop down in the top right. If you export the maps and then reimport them the zoom level is fixed. I'd try this on one map first to make sure everything looks okay and then you can do multiple maps and or buildings at a time. I had all 100+ maps of ours updated in an hour or so doing this and all the AP locations were still fine. Make sure you log in to Prime using root so you can export/import using the XML option.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...