Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Vendor-Specific Attribute for NPS

Dears,

I need to know the vendor-specific code for Cisco Wireless Controller that is required for authentication with on Microsoft NPS.

Regards,

Mohammad                   

1 REPLY
Hall of Fame Super Silver

Re: Cisco Vendor-Specific Attribute for NPS

You don't need any for normal radius, but if your looking at passing attributes back from NPS to the wlc, here you go:

Attribute Name VSA Number Attribute Format Value
Airespace-WLAN-ID 1 Decimal WLAN ID
Airespace-QOS-Level 2 Decimal Blank-Silver, 1-Gold,
2-Platinum,3-Bronze
Airespace-DSCP 3 Decimal DSCP Value
Airespace-802.1p-Tag 4 Decimal 802.1p Tag
Airespace-Interface-Name 5 String Interface Name on WLC
Airespace-ACL-Name 6 String ACL Name

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
755
Views
0
Helpful
1
Replies