Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco WCS - Help!

I have a requirement from a customer to report on the following events:

Note: Using WCS 6.0.181.0 and 4400 wlc with 6.0.181.0 - I've already requested updates of both to 7.0.240.0

Monitoring/Reporting/Alerting on the following:

  1. Excessive association and authentication failures
  2. Abnormal activity
  3. Misuse of the WLANs
  4. Excessive User traffic
  5. IP address Theft or Re-use
  6. Adverse Changes in Performance

Whilst point 1 and 5 I have covered, is it possible to set thresholds so that alerts will be generated for excessive user traffic? Abnormal activity and misuse of WLANs is very ambiguous but any advice would be gratefully received

BR

Rockford

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Cisco WCS - Help!

Aside from 1 and 5, the rest is NO. 

2 and 4 can be done on your authentication and accounting server.  The rest is possible but it means a different solution.

1 REPLY
Hall of Fame Super Gold

Cisco WCS - Help!

Aside from 1 and 5, the rest is NO. 

2 and 4 can be done on your authentication and accounting server.  The rest is possible but it means a different solution.

125
Views
0
Helpful
1
Replies