Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco Wifi AP able to support two authentications types?

A partner for cisco tells me that you can have two types of authentication methods on a single Wifi AP.

Is there any truth to this? And if so how is this achieved?

For Example, I would need domain users to authenticate to a radius server for access to the wifi, but i also need a BYOD network, and a open wifi network for customers, and a special network for confidential stuff that i can't mention in this forum.

My thought is that i need at least 4 access points to achieve this.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi Check these link

Hi Check these link:

Configuring Cisco Secure ACS for Windows v3.2 With PEAP-MS-CHAPv2 Machine Authentication

http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43486-acs-peap.html

Dynamic VLAN Assignment on autonomous AP using ACS 5

https://supportforums.cisco.com/document/74751/dynamic-vlan-assignment-autonomous-ap-using-acs-5

EAP Authentication with RADIUS Server

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44844-leapserver.html

 

 

Regards

Dont forget to rate helpful posts

1 REPLY
VIP Purple

Hi Check these link

Hi Check these link:

Configuring Cisco Secure ACS for Windows v3.2 With PEAP-MS-CHAPv2 Machine Authentication

http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/43486-acs-peap.html

Dynamic VLAN Assignment on autonomous AP using ACS 5

https://supportforums.cisco.com/document/74751/dynamic-vlan-assignment-autonomous-ap-using-acs-5

EAP Authentication with RADIUS Server

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44844-leapserver.html

 

 

Regards

Dont forget to rate helpful posts

56
Views
0
Helpful
1
Replies
CreatePlease to create content