Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco WLC new dashboard?

Is this available in 5508 WLCs? or just in 2504.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

It is only available to 2504

It is only available to 2504.

HTH

Rasika

**** Pls rate all useful responses ****

2 REPLIES
VIP Purple

It is only available to 2504

It is only available to 2504.

HTH

Rasika

**** Pls rate all useful responses ****

VIP Purple

In 8.0.110.0 (8.0MR1) code

In 8.0.110.0 (8.0MR1) code there is some enhancement for this dashboard for 2500 series.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80mr1.html

Preparing Cisco 2500 Series WLC to use Cisco WLAN Express Setup (Wireless)

Step 1 Plug in a Cisco AP to any one of the ports of Cisco 2500 Series WLC. If you do not have a separate power supply for the AP, you can use Port 3 or Port 4, which supports PoE.

Step 2 After the AP boots up, the AP associates with the WLC and downloads the WLC software.

Step 3 The AP starts provisioning a WPA2-PSK SSID “CiscoAirProvision” with the key “password.”

Step 4 Associate a client device to the “CiscoAirProvision” SSID.

The client device is assigned an IP address in the 192.168.x.x range.

Step 5 On the web browser of the client device, go to http://192.168.1.1 to open the GUI configuration wizard, which you can use to run Cisco WLAN Express Setup.

HTH

Rasika

 

416
Views
0
Helpful
2
Replies