Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure Cisco Access Point by SNMP

Hello,

I'm trying to configure my WLAN access point Aironet 1252 (AIR,RM1252A-E-K9; IOS version 12.4(10b)JA) by SNMP.

The community string for read/ write access is set and the SNMP configuration is working. For example I'm able to restart the device.

I like to change the WPA Pre-shared Key but I cannot find a fitting OID. I searched any MIB's for the access point and try to find something by doing an snmp walk.

Can anyone help me?

Thanks!

Regards

2 REPLIES
Cisco Employee

Re: Configure Cisco Access Point by SNMP

Hello friend:

That object should be cdot11SecAuxSsidWpaPsk from the CISCO-DOT11-SSID-SECURITY-MIB.

The Cisco IOS MIB Locator is at http://tools.cisco.com/ITDIT/MIBS/MainServlet

Sincerely,

Rollin Kibbe

Network Management Systems Team

New Member

Re: Configure Cisco Access Point by SNMP

Hi,

thank's for your support.

I discovered the OID fitting to the VLAN and SSID (enterprises.9.9.413.1.1.1.1.7.13.69.71.65.87.76.65.78.45.71.85.69.83.84).

But if I try to set some value I get the following error message from snmpset (net-snmp, linux):

Error in packet.
Reason: commitFailed
Failed object: SNMPv2-SMI::enterprises.9.9.413.1.1.1.1.7.13.69.71.65.87.76.65.78.45.71.85.69.83.84

Have you an idea why this doesn't work?

By the way: I'm using Multi-SSID's and VLAN's.

Kind regards

580
Views
0
Helpful
2
Replies