Connecting LAP1231 using stacked pair of 3750's switch
I am trying to connect my LAP1231 to switch port on stack pair of 3750s that is connected to 6509 switch. When I look at the mac address table of the 6509 switch I don't see the mac address of my LAP. I have the switch port configured on the 3750 to right VLAN and set switchport host as well as switchport mode access. I have 27 other LAP access points connection and this is the only one I am having troubles with. Does anyone know of some issue with stacked 3750-24 switches running 12.2(25r)
Re: Connecting LAP1231 using stacked pair of 3750's switch
After I sent sumitted the posting I found my problem. I had added a VLAN list to the interface and forgotten I had done this. Once I added the VLAN to the list everything worked as advertised. Thanks for the response.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...