Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Convert .crt to pem file...

I need to convert a trust certificate (.crt) to .pem file to be recognized in a WLC...

anybody can help me ?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Convert .crt to pem file...

Here's a good guide how to do it.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

I already did it this way along with a Microsoft Cert Auth. So it should work fine. Hope that helps!

2 REPLIES
New Member

Re: Convert .crt to pem file...

Here's a good guide how to do it.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

I already did it this way along with a Microsoft Cert Auth. So it should work fine. Hope that helps!

New Member

Re: Convert .crt to pem file...

This was very helpful, thank you !

1721
Views
0
Helpful
2
Replies