Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Converted LAP - password?

Hi,

I've recently converted my autonomous AP (1252) to a LAP. It is now controlled by my 4402 WLC (version 4.2.112).

How can I change the password on the 1252? As I stupidly left it as the default before up I upgraded. I just used a tar file and the archive download-sw method.

Many thanks,

J

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Converted LAP - password?

That password you had initially when the ap was in autonomous does not matter. Now since you have the ap joined to a wlc you need to enter the following command in the wlc cli:

config ap username password all

config ap username password

All configurations on the AP will be done by the WLC. You can't configure the LAP like an autonomous ap.

-Scott
*** Please rate helpful posts ***
2 REPLIES
Hall of Fame Super Silver

Re: Converted LAP - password?

That password you had initially when the ap was in autonomous does not matter. Now since you have the ap joined to a wlc you need to enter the following command in the wlc cli:

config ap username password all

config ap username password

All configurations on the AP will be done by the WLC. You can't configure the LAP like an autonomous ap.

-Scott
*** Please rate helpful posts ***
New Member

Re: Converted LAP - password?

It worked! Thank you.

273
Views
0
Helpful
2
Replies
CreatePlease login to create content