ā10-13-2010 12:51 AM - edited ā07-03-2021 07:16 PM
How I solve a problem in this case ? and Log detaill as below
*Oct 13 14:05:56.936: %DOT1X-3-WPA_SEND_STATE_ERR: 1x_kxsm.c:1249 Unable to send EAPOL-key msg - invalid WPA state (0) - client 64:b9:e8:8a:2c:8a
Thanks in advance
ā10-14-2010 01:56 AM
Hi Peeravin,
You can obtain additional info on the error message from reference link:
http://www.cisco.com/en/US/docs/wireless/controller/message/guide/msgs4.html#wp1000139
Explanation Client authentication failed because the session was not in the correct state when attempting to send an EAPOL-key message.
-Is this related to specific client or all clients?
Please can you verify for latest client drivers/firmware
During problem replication ,You can also debug for a specific client from WLC cli:debug client
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a008091b08b.shtml
Also what is the AAA server in use, do you have any auth failure reports on AAA server logs?
Regards,
Alex
ā05-23-2011 05:51 AM
Hi.
We have the same issue.
This is isolated incidents (we have approx 2000 users). The vast majority is unaffected. This one particular user however has is struggeling with this problem several times a day. SOmetimes the connection comes throug, sometimes not. SOmetimes the user gets dis-associated after 20 minutes or less.
Model: Dell Latitude E5400
NV card: Intel WiFi Link 5100 AGN
OS: Windows Vista Home Basic
Driverversion: 13.3.0.24 (14. Juli 2010)
May 23 12:42:29.019: %DOT1X-3-WPA_SEND_STATE_ERR: 1x_kxsm.c:1249 Unable to send EAPOL-key msg - invalid WPA state (0) - client 00:22:fb:d0:f0:f8
Checked the logs in our RADIUS.The authentication attempt that failed is not in radius logs, but another successfull attempt approx 25 seconds after, is in the logs.
May 23 13:42:54 rad freeradius[20960]: Login OK: [xxxxx] (from client HIST_WLC1 port 29 cli 00-22-fb-d0-f0-f8 via TLS tunnel)
May 23 13:42:54 rad freeradius[20960]: Login OK: [xxxxx] (from client HIST_WLC1 port 29 cli 00-22-fb-d0-f0-f8)
Don't have debug-log from this user yet.
Any tips or hints?
-Erik.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: