Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

cpu is very high on WLC

hallo all;

now i have big Issue in WLC i have wisem 2 on 6500 switch today.

the memory is normal 43% Without any justification the memory go to 73% I check the loggin on wisem (#show loggin) i see all logs is run between 2 or 3 munit  after this I check the cpu in 6500 (#show cpu history) i see the cpu is to high in switch 6500 and i attach capture and log file. please advise


1 REPLY
Hall of Fame Super Silver

cpu is very high on WLC

There is another post regarding this... no big deal unless it gets in the upper 90%.  A WLC with no AP's will be around 45-55%.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
141
Views
0
Helpful
1
Replies
CreatePlease to create content