Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Decrypt Errors - WLC 4404

Hello,

We recently had a few clients being locked down with countermeasures by our WLC 4404 due to TKIP-MIC errors. After doing some reading on the benefits of AES over TKIP I switched our WLAN security settings to AES, and pushed a new wireless policy to our client machines. Every thing appeared to work well, except now the trap log on the 4404 is showing a LOT of WPA decrypt errors. I've checked a few of the clients that appear to have problems, but they've got the right policy and WPA settings to match what is on the WLC.

It's not one particular NIC, it's various clients.

Any thoughts on how I might clear these up?

Rob

2 REPLIES
Community Member

Re: Decrypt Errors - WLC 4404

One reason for that is configuration of two WEP keys on a single WLAN is not supported. Currently WLAN can only take one WEP key.

Community Member

Re: Decrypt Errors - WLC 4404

We're using WPA, not WEP.

192
Views
0
Helpful
2
Replies
CreatePlease to create content