We need to know if (and how if possible) a WLC may control several APs, configured in a parallel grid array as bridges:
The AP(r) right are non-root, the AP(l) left are the root connected to the CPD, there may be several bridge. We need to control all of them, specially the ones in the right = AP(r) of the bridge. And of course the AP(nb)= non-bridge
We would want to know if we can regulate how the right antenaes connect to the left. Right antenaes need to be on a moving platform, and there is no possible interconnection among the AP(r).
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...