Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP for LWAPP AP

Folks,

I have setup IOS dhcp for APs to register with the 2100 series controller at 172.16.1.25 but it does not seem to be working, please can someone advice me what i am doing wrong.

!

ip dhcp pool ccie

network 172.16.1.0 255.255.255.0

option 43 hex f104.ac10.0114

!

3 REPLIES

Re: DHCP for LWAPP AP

Decimal 25 is 19 in hex.

So you should have option 43 hex f104ac100119.

A nice way to check what your AP is seeing is to connect to the AP console. You will see the AP stating "Got controller address x.x.x.x from DHCP server", and you will see immediately if you provide the right value.

Hope it helps.

Jerome

New Member

Re: DHCP for LWAPP AP

Thank you for the response. It is working now!! but I am noticing that the AP's unregister from the WLC after sometime??? very strange? I am 1250 APs with LWAPP image on them.

New Member

Re: DHCP for LWAPP AP

Have you added the MAC addresses of the APs in 'MAC filtering list' of the controller?

167
Views
0
Helpful
3
Replies