I want to enable the DHCP server on the 1240AG. I only want to give IP addresses to clients who connect on the 802.11g radio interface and not on the 802.11a radio interface or the Ethernet interface. Is this possible, if so how?
(As a compromise I would be satisfied just to deny client's IP addresses who connect from the Ethernet interface and allow both radios.)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...