Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cisco Employee

Does anyone know of a way to tell Prime Infrastructure how often to poll devices

Can PI be configured to poll devices every 5, 10, 15 minutes via a global setting?

All I can find are retry, timeout and backoff algorithm settings.

Let me know.

thanks, rob

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Does anyone know of a way to tell Prime Infrastructure how often

You can navigate to Design > Monitoring Configuration > Features >  Metrics > Interface Health (shown below). Follow the same methodology to  change the polling interval as mentioned for Device Health. You can see how  interface availability is changed to every minute.

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/deployment_guide_c07-721232.html
4 REPLIES
Cisco Employee

Does anyone know of a way to tell Prime Infrastructure how often

try This

Step 1 Select Monitor > Performance Settings > Setup > Automonitor from the menu.

The Auto Monitoring details window appears.

Step 2 Select one of the following values available in the Polling Interval drop-down list to modify the polling interval:

1 Minute

5 Minutes

15 Minutes

30 Minutes

To exclude the group from auto-monitoring, select Don't Monitor from the drop-down list.

Step 3 Click Apply

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/mnt-perf.html

Cisco Employee

Does anyone know of a way to tell Prime Infrastructure how often

Hafed,

this is how to do it in LMS.

I'm trying to figure out how to do it in Prime Infrastructure...

Cisco Employee

Does anyone know of a way to tell Prime Infrastructure how often

You can navigate to Design > Monitoring Configuration > Features >  Metrics > Interface Health (shown below). Follow the same methodology to  change the polling interval as mentioned for Device Health. You can see how  interface availability is changed to every minute.

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/deployment_guide_c07-721232.html
Cisco Employee

Does anyone know of a way to tell Prime Infrastructure how often

Hafed found this::

Interface polling can be very quickly enabled by using a predefined monitoring  template. You can navigate to Design > Monitoring Configuration > Features  > Metrics > Interface Health (shown below). Follow the same methodology to  change the polling interval as mentioned for Device Health. You can see how  interface availability is changed to every minute. 11:56 AM

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/deployment_guide_c07-721232.html

Good find Hafed!!!

271
Views
0
Helpful
4
Replies
CreatePlease login to create content