Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

dual authentication with WLC 5508

We're using WLC 5508 controllers, primarily for Windows 7+ clients, and have had success with both certificate and username/password authentication against a Windows Server 2008 R2 radius server. Currently, users can use one authentication method or the other. Is there a mechanism in the 5508 which would require both certificate and username/password authentication rather than just one or the other?

Thanks!

2 ACCEPTED SOLUTIONS

Accepted Solutions

dual authentication with WLC 5508

No, that would be determined by the AAA server, not the WLC.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

Re: dual authentication with WLC 5508

ISE should work.  It's all in how you define the connection profile.  There also may be some tweak you need to do on the cleint to make this a 'and' vs an 'or'

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
4 REPLIES

dual authentication with WLC 5508

No, that would be determined by the AAA server, not the WLC.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

dual authentication with WLC 5508

Gotcha, thank you for the reply. Something like Cisco ISE then?

Re: dual authentication with WLC 5508

ISE should work.  It's all in how you define the connection profile.  There also may be some tweak you need to do on the cleint to make this a 'and' vs an 'or'

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: dual authentication with WLC 5508

Thank you.

138
Views
0
Helpful
4
Replies