Dynamic WEP Keys In Mixed AP & Workgroup Bridge Environment

[johowell]

I need to implement LEAP in a retail environment. There will be handheld devices with 350PC cards and some POS devices attached to the 350 AP via the 350 Series Workgroup Bridge. What is the best way of managing WEP keys for both the handhelds and the workgroup bridges?...Thanks

[vblavet]

- You can today use LEAP on a Workgroup bridge. You will have to set a login/password in the WGB configuration and define this login/password in the Radius database.

- You must check that your handheld devices support LEAP implementation of the Cisco Drivers. If yes, you will have to set a login/password in the same way.

- You can not have a mixed environment with WGB with LEAP and handheld with static keys on the same LEAP secured AP. When secured by LEAP only LEAP client should be supported