Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

mhs
New Member

EAP authentication MS IAS RADIUS across Subnets without DC

I have 2 sites set up using MS IAS 2003 RADIUS server and Cisco 1230 APs. Both site that I have configured have MS DCs local and both sites perform USER and HOST based authentication. I have attempted to set up a third site, but this site is unique b/c it does not have a DC local. At this site the authentication apears to be timing out even though I set all timeouts to the highest intervals.

I need the PC to be authenticated at the Windows login screen, then I need the usercredentials passed to a DC, then I need them to be allowed access to the Network. THe device is requiring a local cached user to gain access then it is authenticating and assigning an IP. However, I need this all to happen at the loginscreen prior to loggin in b/c I do not allow local cached profiles.

I had this simmilar problem at a nother site and adjusting the timeouts corrected that but a DC was also local.

Any ideas are appreciated

228
Views
0
Helpful
0
Replies