we plan to use EAP-FAST for the authentification of client devices but would like to increase the security by using PKI-Server Certificates for the ACS Radius Server. Do you know if that is possible ? Or do we need PEAP for Radius Server Certificate validation ?
As far a i know EAP-FAST will not support server side certificates. EAP-FAST was developed to address the deficiencies in LEAP and one of the key design requirements was that it did not use certificates which made it relatively easy to deploy.
If you want server validation with certificates then PEAP is the way to go.
Under FAST settings, it is possible to specify Validate Server Certificate, which permits the client to validate the EAP-FAST server (ACS) certificate prior to the establishment of an EAP-FAST session.
This provides protection for the client devices from connection to an unknown or rogue EAP-FAST server and inadvertent submittal of their authentication credentials to an untrusted source. This does require that the ACS server have a certificate installed and the client also has the correspondent Root Certificate Authority certificate installed.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...