Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EAP-FAST with ACS 5.3 and WiSM | 5411 EAP session timed out

Hi ALL,

In our setup we have WiSM modules installed on cisco 6506-E, ACS 5.3 virtual appliance.

We are trying to implement EAP-FAST for our Wireless using WPA/WPA2 802.1x on the WLC side.

I have followed the instructions in the following document step-by-step:

https://supportforums.cisco.com/docs/DOC-15587

Still I have no success. Tried most of the permutations on ACS EAP-FAST configuration.

I recieve the following error in acs:

Untitled.jpg

Appreciate your help.

Regards

Ramakrishnan Natarajan

Everyone's tags (4)
2 REPLIES

EAP-FAST with ACS 5.3 and WiSM | 5411 EAP session timed out

what supplicant are you using on the laptop?  It looks like it is sending the username anonymous, instead of a valid username.

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Cisco Employee

EAP-FAST with ACS 5.3 and WiSM | 5411 EAP session timed out

can you run debugs on the controller to see whats being sent to the radius and whats coming back?

> debug client

> debug aaa events enable

Also, check how the profile has been setup on the laptop

1560
Views
0
Helpful
2
Replies
CreatePlease to create content