Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EAP-SIM, AP 1200, Navis Radius

Hello

We are trying to implement EAP-SIM with Radius (Lucent Navis Radius) and the Cisco AP 1200 and the "Option GlobeTrotter Fusion+" PC Data Card.

In the datasheet of the AP 1100 I found the support of EAP-SIM. But I didnt in the datasheet of the 1200. So my question: Is it possible to implement EAP-SIM with the Cisco Aironet 1200 Access Point ?

I think the Radius-Server should not be the problem because it is always the same RADIUS-Protocol right?

Or do you have any experience with EAP-SIM?

thx

regards roman

2 REPLIES
Silver

Re: EAP-SIM, AP 1200, Navis Radius

Hi Roman,

in the 1200 FAQ there is EAP-SIM announced to be continued.

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a00802030dc.shtml

On the other Hand, the AP ist not the keyplayer for eap-sim. The supplicant (Wireless Client Card).

AFAIK EAP-SIM is supported through the usage of TKIP on the AP.

Read this white paper, especially the section eap-sim.

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_white_paper09186a00800b469f.shtml

Best regards,

Frank

P.S. Please rate helpfull posts

New Member

Re: EAP-SIM, AP 1200, Navis Radius

thx was helpfull, especially the second link!

regards, roman

704
Views
4
Helpful
2
Replies