I have several Aironet 1100 AP's which are configure to use EAP/TLS to authenticate against a Cisco ACS server.
We are using Aironet 350 pcmcia cards. This setup had been working up until friday when we moved the ACS server to a new IP address. Since then if I try to connect using the Cisco software bundled with the 350 pcmcia card it fails authentication. If I use the windows wireless config it works perfectly. Unfortuantley most of the pcs are running win 2000 so I need to get the cisco software working again.
In ACS failed Auth logs I get the following message "Invalid message authenticator in EAP request" but from the other AP's I see nothing in the logs.
I have checked the keys are correct and the user certificate is ok as I can connect using the inbuilt Win XP config util.
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...