cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
387
Views
0
Helpful
1
Replies

EAP-TLS machine authentication problems

kjae
Level 1
Level 1

Well..

I have the following devices:

WCS

Wlan controller 4402

AP 1130 LWAPP

Workstation XP sp2

Secure ACS 4.0

Windows CA

Windows AD

---------------------

Everything else is working properly, except EAP-TLS. Server certificate is installed in ACS and trust list is OK. Client certificate is installed in workstation machine store. PEAP-MsCHAPv2 working OK, ACS logging prompts successful authentication. I tried to use the certificate authentication from windows wlan properties, but the log was still empty.

Which clarifications do I have to do in ACS and AD?

Can someone help me and give me very detailed instructions on how to make it work.

1 Reply 1

satukoivikko
Level 1
Level 1

Hi,

We had a same problem until we ran 2 windows hotfixs. Those are: WindowsXP-KB893357-v2-x86-ENU.exe and WindowsXP-KB890046-x86-ENU.exe Have you tried to do this. Our EAP-TLS machine authentication is working fine now.

Have you enabled EAP-TLS authentication in ACS? ACS-> System configuration: Mark Allow EAP-TLS

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: