With both the 802.1x and CCKM enabled will the clients use one or the other method depending on the clients ability? So if the clients support cckm they will use cckm, and if the clients use 802.1x they will use that method? Or am I misunderstanding here?
FYI - I've had to do some troubleshooting on this in the past, and came across a quirk as well that isn't explicitly mentioned in the "Mobility Design Guide" (it may be now).
It was relating to whether or not mobile clients would support CCKM on a WPA2 network utilizing AES encryption. Cisco's documentation (mobility design guide in particular) will state that CCX compatible devices will support CCKM on an AES WLAN, but what they don't explicitly state is that it only applies to CCX v5 clients. Currently, there aren't that many that actually support CCX v5. I think only Cisco handsets, the last I checked.
Anyway, just wanted to throw that tidbit out there as it was quite the ordeal trying to track down the details at the time.
Bulletproof Solutions Inc.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...