Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ERROR:- Cannot upload the config of WLC on WCS

Hi,

I am not able to save the config on wcs of wlc controller plz have a look and suggest me if i am doing anything wrong here.

(WiSM-slot1-2) >transfer upload mode tftp

(WiSM-slot1-2) >transfer upload datatype config

(WiSM-slot1-2) >transfer upload serverip 10.10.10.10

(WiSM-slot1-2) >transfer upload path /

(WiSM-slot1-2) >transfer upload filename WLCconfig

(WiSM-slot1-2) >transfer upload start

Mode............................................. TFTP

TFTP Server IP................................... 10.10.10.10

TFTP Path........................................ /

TFTP Filename.................................... WLCconfig

Data Type........................................ Config File

Encryption....................................... Disabled

*** WARNING: Config File Encryption Disabled *****************************************************

Are you sure you want to start? (y/N) y

TFTP Config transfer starting.

Error while preparing for transfer!

NOTE: I am using the WCS as the server and not using any other tftp. Any help would be appricaited.

2 REPLIES
New Member

Re: ERROR:- Cannot upload the config of WLC on WCS

try putting in the file extention as well as file name e.g WLCconfig.txt

New Member

Re: ERROR:- Cannot upload the config of WLC on WCS

After reloading it works.

293
Views
0
Helpful
2
Replies