Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

ERROR: mapped-address conflict with existing static

I am trying to NAT the same external address to three different hosts but using the same port.

static (inside,outside) tcp 63.76.x.x 8224 208.x.x.29 8224 netmask 255.255.255.255

static (inside,outside) tcp 63.76.x.x 8224 208.x.x.23 8224 netmask 255.255.255.255

static (inside,outside) tcp 63.76.x.x 8224 208.x.x.153 8224 netmask 255.255.255.255

2 REPLIES
New Member

Re: ERROR: mapped-address conflict with existing static

Not possible I'm afraid. You'll need to use different ports for both the original and mapped IP's.

Bronze

Re: ERROR: mapped-address conflict with existing static

Right, I tried different scenarios but it is not possible. I should have of removed this post last week.

385
Views
0
Helpful
2
Replies
CreatePlease to create content