Re: Error upgrading the firmware from 3.0 to ny version on WLC
Still i am facing the same problem.Now i have downloaded the tftpd32 and I tried connecting via the Service Port interface which has a different IP address. I conneced to the controller via the console cable to issue the commands but it still will not transfer. I can ping the tftp server from the Controller. I used the paths specified , ie , "." and "./" but stil the result is same.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...