Ideally, what throughput should one see with a 3602i and an Intel 6205 card on dual channl 5 GHz? The intel card being a 2x2 card
I'm testing with the 3602i to a gig port on a 6500 that my 5508's connect to as well. Was running jperf on another machine connected to a gig port and seeing around 50mbit/s from one client, but 104mbit/s on another in a fairly isolated enivornment. I was unsure of the differences here considering it was the same model of machine, with base OS and same driver versions until I tried Tamosoft's free program. Things became more consistant between the two. I'm not sure if this has to do with the fact I was using jperf with the gui interface or is indictive of iperf as well. Which is disconcerning since Airmagnet Survey has an iperf option. Regardless, this posed the question, what should I be seeing ideally? We're fairly new to N and just trying to get hold of it.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...