Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FLEXConnect over IPSEC

Hi,

I have a IPSec site to site VPN.

 

at our main office we have a WLC 2500 series.

 

we have just deployed an AP ( AIR-CAP3602I-E-K9  ) in flex connect mode at our branch office. The WLC at the main office can see it, however no clients seem to be connecting. The DHCP server is local on the spoke site i thought it would just work. Is there anything i need to set in the WLC to get this working?

 

Thanks

3 REPLIES
VIP Purple

did AP joined to WLC???

did AP joined to WLC???

 

please check this guide :

http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/71250-h-reap-design-deploy.html

 

Regards

New Member

Yes the ap has joined the WLC

Yes the ap has joined the WLC over IPSEC vpn. Just looking at the link you sent me local switching has to be done in standalone mode not flex connect is that correct?

Thanks

VIP Purple

Which state you want to apply

Which state you want to apply, its depends on that:

  • Central Authentication, Central Switching
  • Authentication Down, Switching Down
  • Central Authentication, Local Switching
  • Authentication Down, Local Switching
  • Local Authentication, Local Switching

Check the config for each:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81680-hreap-modes.html

 

Regards

Dont forget to rate helpful posts

155
Views
0
Helpful
3
Replies
CreatePlease login to create content