Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Group APs by which SSID to broadcast

Hi all

Now, I have searched for this for several days - I want to determine which APs show certain SSIDs. There must be a smart way to do that beside using the override function on 100 different APs.

I have WLC 4404 and 1131AG-E-K9 LAPs.

Any suggestions?

Thanks in advance.

Peter

  • Security and Network Management
4 REPLIES
New Member

Re: Group APs by which SSID to broadcast

Hi,

Yes there is... but in 5.2.x version. Instead of WLAN override you are grouping AP. I think that below 5.2 you have only WALN Override.

Chers

Greg

New Member

Re: Group APs by which SSID to broadcast

Thank you Greg.

Im running 4.2.112.0 right now, so must upgrade in future.

Hall of Fame Super Red

Re: Group APs by which SSID to broadcast

Hi Peter,

The most popular way to mitigate the problem of having to access each AP individually (when using WLAN Override) is to use WCS Templates for common requirement AP's. This way the WLAN Override function can be applied at the Template level and then pushed out to the various groups.

http://www.cisco.com/en/US/docs/wireless/wcs/4.0/configuration/guide/wcstemp.html#wp1072198

Hope this helps!

Rob

"May your heart always be joyful And may your song always be sung May you stay forever young " - Dylan
New Member

Re: Group APs by which SSID to broadcast

Well, it is certainly the most expensive way. I have no need of the Wireless Control System.

I will just upgrade my controller to ver. 5.2 and you can consider this topic as solved.

137
Views
0
Helpful
4
Replies
This widget could not be displayed.