Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Guest Access in 4.2.112/130 code

I've just upgraded our controllers from 4.1.185 to 4.2.130 and have noticed some new settings and features for Guest access, specifically on the interfaces and the wlans. Can some one point me to an updated guide on the explanation of these new additions and the recommend setup now? Until I see an explanation on paper so as I can fully understand it, I don't want to change my current setup. i.e. Guest Lan, Ingress Interface, Egress Interface.

  • Security and Network Management

Re: Guest Access in 4.2.112/130 code

per the rel notes, there are no new features

The help section on the controller states:

The guest access feature is for directing wired guest traffic to a foreign controller by way of the access switch, and the egress interface provides a path out of the foreign controller for wired guest client traffic.

here is the command ref:

SO, if you want to have guest users on the wired network participate with the wireless users, this feature is for you

Re: Guest Access in 4.2.112/130 code

Here is an even better link:

the nutshell....

"A growing number of companies recognizes the need to provide Internet access to its customers, partners, and consultants when they visit their facilities. With the new Wired Guest Access feature support on the Cisco WLAN Controllers that uses Cisco Unified Wireless Software Release and later, IT managers can provide wired and wireless secured and controlled access to the Internet for guests on the same wireless LAN controller.

Guest users must be allowed to connect to designated Ethernet ports and access the guest network as configured by the administrator after they complete the configured authentication methods. Wireless guest users can easily connect to the WLAN Controllers with the current guest access features. In addition, WCS, along with basic configuration and management of WLAN Controllers, provides enhanced guest user services. For customers who have already deployed or plan to deploy WLAN Controllers and WCS in their network, they can leverage the same infrastructure for wired guest access. This provides a unified wireless and wired guest access experience to the end users."

New Member

Re: Guest Access in 4.2.112/130 code

Thanks for the info. I knew you could do wired access, but just looking at the configuration pages on the wlc, it doesn't really state that is what those commands are for. Appreciate it.