I have several controllers spread through europe and one anchor at the central site - will be 2 at least in future. I want to run one guest access SSID for the whole company with the same name. All data is send to the central anchor controller and users are authenticated by ACS over a webauthentication page. All this works fine except the following need:
I want to run different languages on this one SSID for the webauthentication page, but I do not have any means to see, where the user is coming from (from what AP, on what controller, from which country, etc.).
The only way I would see is, to implement a database with all AP MAC addresses and - based on the ap_mac paramter from the guest access url - give them their login page in their language. The problem is, doing anchoring, this MAC is always all ZEROs.
Anyone any hint if this is a bug or any other idea how to do different login, logout pages for ONE SSID ?
PS: Sorry for posting this in the security discussion :-(
I don't know how your authentication page is set (local to the central controller or external), but couldn't you filter (if you can do such filtering) based on the IP address of the foreign controller? In the mobility tunnel, the source is the foreign controller, so you can determine which country the tunnel is coming from...
Not sure on how you can filter from this, but it might be an idea...
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...