Guest SSID on a dynamic VLAN (AP1230 with IAS) environment
I got the following situation:
- AP 1230 PEAP-WEP-Auth.
- XP (SP2) Client
The dynamic vlan assignement/authentication is working (with one SSID). When I configure a second (guest) SSID, there is no longer possible to get connected with one of the dynamic VLAN (authentication with the RADIUS is working, but no access to the VLAN).
I read an old posting that there is an issue with more than one SSID when using dynamic vlan.
IntroductionHow to use the Wireless LAN Controller Configuration Analyzer (WLCCA)
Javier Contreras is a Senior Tech Lead for the Wireless Business Unit in Cisco, with over 2 decades of experi...
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...