06-05-2008 07:47 AM - edited 07-03-2021 03:59 PM
I have wireless lan controller 2xxx and created a separate guest wlan and vlan and need to give them only internet access. If I have a PIX, should I put them in the PIX dmz and just have a switchport in guest vlan connected to PIX DMZ port?
Or is there a way to send both guest vlan and internal vlan thru inside interface of PIX?
06-05-2008 07:54 AM
If you have a 2006 or 2106, you can setup the wlan ssid to go out one of the unused ports and that can go into the DMZ. Keep th eport for the management and ap-manager in the inside.
06-05-2008 06:19 PM
Here are a couple links:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008070ba8f.shtml
http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob41dg/ch10GuAc.html
Best Practice Guide
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080810880.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide