GUI WLC 2100

[Emerson Rodrigues]

Hello Guys, please someone help me.

I can't access the gui from cisco WLC 2100 device, i changed IP's to the same subnet, connected straight-through cable on both interfaces (Notebook & WLC), i can ping, but can't access the GUI by using ethernet connection.

I've tried to access the GUI using WI-FI and it worked perfectly, but i still can't access using ethernet, please give me advices!

Is there a way to upgrade WLC IOS using wireless?

Thx

[Rasika Nayanajith]

Go to console of the WLC & post "show interface detail management" output. In WLC Which ports connect back to switch & what is the switch port configuration looks like ?

In the switch, post "show run interface x/x" where x/x is connecting to your 2106.

Rasika

[Emerson Rodrigues]

Hello Rasika, thanks for answer.

I've solved the issue after a reboot.  I don't know what happened, but is working now.  Thanks for advice.

[pieterh]

Ip of interface is changed at OS level, but running processes (like web gui) don't know untill restart controller.

Sent from Cisco Technical Support iPad App