Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

GUI WLC 2100

Hello Guys, please someone help me.

I can't access the gui from cisco WLC 2100 device, i changed IP's to the same subnet, connected straight-through cable on both interfaces (Notebook & WLC), i can ping, but can't access the GUI by using ethernet connection.

I've tried to access the GUI using WI-FI and it worked perfectly, but i still can't access using ethernet, please give me advices!

Is there a way to upgrade WLC IOS using wireless?

Thx

3 REPLIES
VIP Purple

GUI WLC 2100

Go to console of the WLC & post "show interface detail management" output. In WLC Which ports connect back to switch & what is the switch port configuration looks like ?

In the switch, post "show run interface x/x" where x/x is connecting to your 2106.

Rasika

New Member

GUI WLC 2100

Hello Rasika, thanks for answer.

I've solved the issue after a reboot.  I don't know what happened, but is working now.  Thanks for advice.

Bronze

Re: GUI WLC 2100

Ip of interface is changed at OS level, but running processes (like web gui) don't know untill restart controller.

Sent from Cisco Technical Support iPad App

196
Views
0
Helpful
3
Replies