Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Help Please: WLC 2106 and RADIUS

Hello,

In the WLC there are two groups (say A and B).  How would I take group B and point it to a RADIUS server for authentication please?  Looking for a step by step answe please. The server is ping reachable.  I have seached  but did not see any difinitive answer.

Thanks!

3 REPLIES
New Member

Help Please: WLC 2106 and RADIUS

I should add that the RADIUS box's IP is in the WLC.  I guess I'm just looking for how to make group "B" go through the RADIUS server for authentication please.

Help Please: WLC 2106 and RADIUS

at the moment, the only way to do this is on a per SSID basis if you really want seperation.

now, that being said,  If user B does not exist in the domain of AAA -A, then it will not respond, or at least not with a reject.  After the third attempt, the WLC should send the request to AAA-B.

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

Re: Help Please: WLC 2106 and RADIUS

You can achieve what you want per WLAN.

configure authentication servers order in wlan settings as per this image:

http://www.cisco.com/en/US/i/200001-300000/230001-240000/232001-233000/232514.jpg

HTH

Amjad

You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

Rating useful replies is more useful than saying "Thank you"
338
Views
0
Helpful
3
Replies
CreatePlease login to create content