How could I download the Web_Auth bundle from the WLC
I need to upload a separate web authentication login page for a guest SSID to be used at our branch office with HREAP APs.I have read that the bundle should contain a login.html file and I can add other login files and choose it under the WLAN setting using the over-ride feature.
But the problem is that there are a lot of web login pages already in the same WLC being used for several guest SSIDs used at multiple branch locations and I do not have the backup copy of the entire bundle with me as the wireless network was being managed by someone else.
So how is it possible it to upload another login page to the WLC? Is it possible to download the entire bundle from the WLC, add another login page to the bundle and repload?
Thank you in advance for any help you could provide.
Re: How could I download the Web_Auth bundle from the WLC
You would need to open up or preview each page and copy source code along with the images if any. Then you would have to recombine all the files into a bundle that is less than 2MB which I believe is the max file size for the bundle.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...