Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do I configure the AAA Server on the Cisco 350 AP

I would like the best method to configure my AAA on my individual AP via the http: can I configure via other method

Regards

McNaz

4 REPLIES
Cisco Employee

Re: How do I configure the AAA Server on the Cisco 350 AP

350 access point can be a AAA client only..Pl. visit following url to configure 350 AP to talk to AAA radius server

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch4.htm#xtocid15

New Member

Re: How do I configure the AAA Server on the Cisco 350 AP

Sorry, My question is How can I manage the AP without using the Web based,e.g I would like to change the Radius Ip address

Regards

Kok Seng

Cisco Employee

Re: How do I configure the AAA Server on the Cisco 350 AP

You need to connect a console to 350 AP and configure it thru CLI.

Here is the url for that

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch2.htm

Now here is the menu tree for that..You need to focus on Figure A-4: Security Setup Page Menu Tree

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350axa.htm#61138

You need to go under

setup-->security setup-->Authentication server to change the ip address of AAA server.

New Member

Re: How do I configure the AAA Server on the Cisco 350 AP

I wonder if it is possible to use SNMP to update all the AP via CISCO work if yes

How can I do it Thanks

Regards

MCnaz

148
Views
0
Helpful
4
Replies