Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How return for SSID from MS NPS Radius av-pair for ACL created on WLC

Hello,

please advice about the following situations.

  • In existing infrastructure I want create new SSID (named as: TEST-IN)
  • On SSID TEST-IN I have got mapped interface interface-inside-test (note, this interface is used for the two other SSID)
  • For SSID TEST-IN I need apply ACL (Access list)
  • Problem occurs when about 2/3 of the AP are in FlexConnect and 1/3 AP locally - how can I apply ACL?

About topology:

  • we used 3 WLC 2504 (SW version 7.5.102.0)
  • APs are: AIR-CAP1602I-E-K9 and AIR-LAP1142N-E-K9 (played IOS)
  • AP which are in FlexConnect have different according to location mapped VLAN ID
  • All AP are included in the AP Groups (note: they have mapped WLAN SSID - Interface/Interface Group)

Thank you best regards,

Petr

510
Views
0
Helpful
0
Replies
CreatePlease to create content